Last Christmas we received a new set of bath towels. Many of our old ones had worn through in places and were ready to be retired. I hate to throw out something that still has some life left in it, so here’s what I did:
I cut the towels to salvage the most usable material possible. Then, I serged the edge with my serger. You could also use a wide zig-zag, fold and hem, or use bias binding to finish the edges and prevent fraying.
The white towels were cut down to about half-size. This makes them perfect for wiping up big spills or as a bath mat. The green towels on the right are smaller sized for kitchen and cleaning towels. The stack of squares in the middle can be used in place of disposable cotton squares for toner, make-up remover, etc.
The small squares are also handy for DIY dryer sheets. I keep a few in a small tub on the dryer soaking in diluted white vinegar and lavender essential oil. I wring one out slightly and toss it into the dryer to add a fresh, lavender scent to our laundry.
I wrap my soaps in fabric because it looks nice, it allows the soap to breathe (read here for why), and because it feels better than plastic. I often wonder what happens to the wrapping. I’m sure there are some that toss it. I know of one person who collects the fabric for quilts. For those of you who, like me, don’t want to throw away something that could be useful but don’t know what to do with it, I have a tutorial for a drawstring pouch, just for you.
This is done with the wrapping from one of my soaps, but you could make it in any size you like.
Cloth wrapper from soap (roughly 8×11 inches)
Jute string from soap (about 29 inches)
Needle or Sewing machine
Safety pin or Bodkin
First, iron your fabric flat. Then, fold down a long edge about 3/4 of an inch to one inch and press. This is for the casing. It doesn’t have to be super precise.
Sew a straight seam along the bottom of the flap to form the casing. All the sewing can be done by hand or machine. I have no time or patience, so I choose machine. Fold your material in half with right sides together like a book.
The fold is at the bottom of this photo.
Next, starting just below the casing seam, sew down the side and across the bottom. I use anywhere from a 1/4 to 1/2 inch seam allowance for this. Again, it doesn’t have to be precise.
With scissors, clip the bottom corners, being careful not to cut your stitching. You could probably skip this step, but it helps the corners look square and crisp. Turn your bag right side out.
Now it’s time to thread the string. Tie one end of the string to a safety pin, large paper clip, or attach a small bodkin. This makes it easier to work it through the casing. Thread it through the casing, safety pin first.
Once you get the string to the other side, remove your safety pin or other tool and adjust the string so that the ends are even.
Knot the ends together once or twice to keep it from coming out.
Ta-da! It’s done! Perfect for organizing your purse, storing jewelry or other small items, or as a small gift bag.
Or holding your favorite bar of soap.
Tutorials are always a little complicated to write because it’s easy to overlook small steps in things you do frequently. If something is unclear, please ask. 🙂
If you have any other creative uses for a SubEarthan Cottage soap wrapper, I would love to hear it!
I, Charity Sloan, am a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Any purchases through those links will result in my receiving a small percentage in commission.
Prices are the same whether you click an affiliate link or a non-affiliate link, so you will not be charged more. Thank you for your support!