Charity Sloan, Author at SubEarthan Cottage

Posted on March 6, 2020October 20, 2020 by sophiecls418 — Leave a comment

Mushroom Brown Rice for Instant Pots

Mushrooms are one of those foods that you either love or hate. I love them and try to incorporate them into once in awhile in hopes of swaying my kids to the “love” side. Finn is already there and Thadd is interested but skeptical that something with that texture can be delicious. I’m not giving up on Beckett, but I think he may have inherited his dad’s and grandma’s mushroom dislike.

This mushroom brown rice dish is rich but mild, with the brown rice adding a little nutty flavor. Because the mushrooms are sliced and not chopped, they are large enough for little mushroom skeptics to remove them and eat the rice.

Not a fan of brown rice?

The brown rice adds to the flavor, but takes a lot longer to cook than white rice. With an electric pressure cooker, it’s only about 15 minutes of active prep time. After that, the pressure cooker does all the work. If you’re in a hurry to eat, though, swap it out in favor of a long grain white rice. I like basmati and jasmine rice the best for white rice.

Dietary Restrictions?

As written, this recipe is plant-based, gluten free and dairy free. If you choose to use broth instead of water, that could change depending on the type of broth you use.

One thing I like to keep on hand is a broth base called “Better than Bouillon“. It’s a paste that comes in a small jar. You mix a bit of the paste into water to make broth like you would with bouillon. To me, it really does have a better flavor, and a little goes a long way. I usually have the vegetable version on hand and would have added a bit to this recipe, but I used my last bit up yesterday. They also have a mushroom version that would compliment this recipe as well. Between the onion, garlic, mushrooms and brown rice, though, it’s really not necessary.

All electric pressure cookers welcome.

I’ve titled this post “Mushroom Brown Rice for Instant Pots” because Instant Pot has become the most popular brand and is now synonymous with electric pressure cooker. The recipe should work in any similar electric pressure cooker. Personally, I use a GoWise brand 8 quart electric pressure cooker.

Print Recipe

Mushroom Brown Rice for Instant Pots or other Electric Pressure Cookers

Rich, earthy mushrooms in nutty brown rice make this work as a side dish or, serve with a salad to make it a meatless main course. Makes 6-8 servings.

Prep Time15

Cook Time22

Course: Main Course, Side Dish

Keyword: gluten free, mushroom, rice, vegan

Servings: 8 people

Equipment

Electric pressure cooker, such as an Instant Pot

Ingredients

1 T coconut or other oil
1 small onion, diced
3 cloves garlic, minced
3 cups mushrooms, sliced White, bella or similar.
1.5 tsp salt Can use less if preferred.
3 cups water or broth
2 cups long grain brown rice
1 squeeze lemon juice optional
1 dash black pepper Adjust to taste.

Instructions

Select "Saute" on the pressure cooker and add the coconut oil.
Add the diced onion and saute until translucent.
Add the minced garlic and saute for about a minute more.
Add the mushrooms, salt and pepper. Continue to saute until onions are lightly browned and mushrooms begin to get some color.
Add about 1/2 cup of water or preferred broth and stir up any browned bits from the bottom of the pot. Let simmer for 1-2 minutes.
Add the rice, remaining 2 1/2 cups of water, lemon juice and pepper.
Turn off the "Saute" function and set the pressure cooker manually to 22 minutes or follow your pressure cooker's instructions for brown rice. Most require longer than the "Rice" setting allows.
Allow the pressure to release naturally for at least 10 minutes before doing a quick release. I think it's best to let it naturally release completely if you have the time.
Fluff rice and serve.

Notes

This recipe has tons of flavor with just water, but you can use broth (vegetable broth to keep it vegan) if you prefer. Unless the broth is low sodium, you probably want to reduce the amount of salt.

I like coconut oil, but feel free to use olive or your preferred cooking oil.

Brown rice adds an earthy, nutty flavor, but it takes a long time to cook compared to white rice. If you’re in a hurry, substitute a long grain white rice and reduce the cooking time to 8 minutes or use the “Rice” setting. Basmati is my favorite long grain white rice.

While I try to write recipes as clearly as possible, it’s easy to miss a step or make assumptions. If anything is confusing, please don’t hesitate to comment with your questions. If you make this recipe, please let me know what you think.

Like this post? To make sure you never miss a future post, please sign up for my newsletter.

This post contains affiliate links. If you click through any of the Amazon links and make a purchase, I will receive a small commission. There is no added cost to you.

Posted on March 2, 2020October 20, 2020 by sophiecls418 — 2 Comments

Drafting a Pants (Trousers) Pattern from RTW Shorts

Lately Christopher and I have been talking a lot about fashion. It started as a discussion about not being able to find comfortable clothes, especially pants (trousers for British English speakers) and how hard it is to find clothing that goes against the trends. Being crafty, we explored making our own clothing. The cost of fabric, supplies, time it takes to cut and sew all highlighted how impossible it is to produce clothing ethically at the low prices charged for much ready-to-wear clothing. That doesn’t even take into account the raw materials that are used to make the fabric and problems with content, pesticides, sustainability, etc.

At the same time, like many, our budget, doesn’t allow us to spend a ton on clothes. We try to make the most of our clothing budget guilt-free by shopping thrift stores and second hand shops. That way we aren’t adding to the problem by purchasing new. Most thrift shops are charity-based, so our purchases help others. We often find better quality items than what we would otherwise be able to afford this way, too.

With thrift shopping, you’re not as limited by trends. If you’re looking for something in particular, unless it’s a common item, you’re still likely to come up empty handed. That has been our problem when it comes to comfortable men’s and boy’s pants. Both Finn and Christopher would prefer something a little roomier, like karate gi pants. Unfortunately, nothing like that has been in fashion since M.C. Hammer. That means it’s time to put my sewing machines to use.

Making a Pattern from Shorts

This summer, I started by trying to copy a pair of the cotton knit gym shorts they practically lived in, adding a gusset for comfort and mobility. I used to buy bulk bags of t-shirts from Thrift Town before they closed, so instead of using new fabric, I used some XL t-shirts I had on hand. That way, if things went horribly wrong I wouldn’t feel as bad.

If you follow me on Instagram, you might remember seeing this photo with some enticing caption like, “Working on a new project!” Then, nothing else was said. Sorry.

I have zero experience with pattern making, so this was a learning experience. Here’s a brief overview of how I did it.

I laid the shorts inside out and folded in half, front to the inside, smoothing them as flat as possible. Then I traced them, adding about an inch all around. The inch is for seam allowance and to account for the fact that it’s impossible to get finished shorts to lay flat. I always err on the side of too big, because that is much easier to fix.

At the waistband, I measured the waistband and extended the pattern by that amount plus seam allowance above the waistband. This allows it to be folded down for elastic and a drawstring casing. At the hem, I extended the lines two times the width of the hem to allow enough fabric to fold and hem. On the pattern, I drew lines straight across to show where the finished hem and waistband hit on the original shorts for reference.

Then I folded them in half , backs to the inside and repeated the above steps since the back is cut differently than the front.

Drafting the Gusset

For the gusset, I drew kind of a triangle with the top point cut off. To do this evenly, I folded a piece of paper in half, drew a half inch line perpendicular to the fold, moved over about four inches and drew another perpendicular line measuring one and a half inches. Then I drew a straight line connecting the tops of the lines. I cut along the lines and opened it up to get my gusset pattern. Sewing the gusset in with the wider part at the crotch seam and using a half inch seam allowance results the gusset tapering down to a point.

Shorts to Pants

Shorts work for summer, but I needed to come up with a pants pattern for fall and winter. Chris suggested just making the shorts pattern longer, so I did by measuring the waist to floor measurement and extending my pattern the needed amount, including seam allowances.

I did this by taping the bottom of the pattern to a big piece of paper, sketching out the needed length and side seams and cutting it out.

Final Pants Result

My pattern isn’t perfect. I think I’ve tweaked it each time I’ve used it. Since the pants are made to be loose and flowy it hides the imperfections.

These are my first attempt. I made them with a linen blend, elastic and drawstring combo waistband and no pockets. I added side-seam pockets later.

My goal is to find or draft a few more basic, customizable patterns for pants and shirts that can be made in linen or a similar material. Then I can buy a bulk amount of undyed fabric and dye it as needed.

Like this post? To make sure you never miss a future post, please sign up for my newsletter.

Posted on February 28, 2020October 20, 2020 by sophiecls418 — Leave a comment

Tips for Buying Your First Sewing Machine

Whether you want to make your own clothes or home decor or just be able to mend and tailor the things you already have, a sewing machine makes it much easier. If you don’t have much experience with sewing on a machine, though, it can be daunting looking at all of the choices out there. While it really is up to personal preference, there are a few guidelines that will help you to find a solid sewing machine that meets your needs.

Determine your stitch needs

What are you planning to do with your sewing machine? For most sewing, you really don’t need a huge variety of stitches. Almost everything can be done with a machine that sews straight and zig-zag stitches, and has a button hole option. A blind hem stitch, an overedge stitch and a smocking stitch round it out nicely for garments and decor construction. If you plan to do decorative top stitching, then look for a sewing machine with decorative stitches you like.

Computerized sewing machine?

Honestly, I avoid computerized machines. A sewing and embroidery combo machine like my Brother SE400 (this is the updated version) is the exception. If you really want to do machine embroidery you will need a computerized embroidery machine. Otherwise, a purely mechanical machine is my recommendation. Even though my embroidery machine is also a regular sewing machine, I prefer to keep my embroidery machine for embroidery only and use another sewing machine for standard sewing. Computerized machines have more things that can go wrong, and I like to keep things simple.

Sewing and Embroidery Machine — This is my model of embroidery machine. It is computerized and scary, lol.

Presser feet

To me, having a variety of presser feet is more valuable than having a variety of stitches. While most things can be done with a standard zig-zag foot, a zipper foot makes sewing in zippers a lot easier. A rolled hem foot makes it easier to sew tiny narrow hems. Button hole and button feet round out the basic feet that make sewing garments easier and with more professional looking results. Those are many other presser feet available, and, while usually not required, they each make their specific task easier.

Most new sewing machines use a universal snap-on presser foot system, so it’s not hard to add more presser feet to your collection. Older machines use a thumb screw to attach the feet, but you can usually screw on a snap on adapter and use snap on feet on them, too. This page gives a good rundown on how to know if a presser foot works for your machine.

Vintage Sewing Machine knit foot — Vintage foot. I think it is a knit foot.

Construction

For a long-lasting machine, the less plastic the better. I prefer vintage machines for this reason. A good metal vintage machine will last forever if maintained properly, whereas machines with internal plastic gears and other mechanisms is more likely to break. If you buy a new machine, it’s more likely to have a lot of plastic components, but you can still look for quality. Check out the display model, if possible. Is there anything already broken just while on display? While the break may have just been a previous too-rough customer, it’s also likely a weak point. Do the knobs, levers and buttons operate smoothly and feel solid? How heavy is the machine? I personally would lean toward a heavier machine.

Used or vintage sewing machine

It’s not hard to find used sewing machines at thrift stores, garage sales or on sites like craigslist in the $20-$75 range. If shopping for a used machine, see if you can test it before buying. If not, gently turn the hand wheel to see if it moves smoothly. They usually turn towards the front. Don’t force it if it feels stiff or resistant. If it turns, are there any weird sounds like something hitting or rubbing that shouldn’t. Are the plug and visible wiring in good shape? Does it pass the construction tests previously mentioned?

With a used machine, you may not have the manual or attachments for the machine. Most manuals can be found online, but if you can, do a quick search for it before buying it. Things like presser feet and bobbins are easy to replace, unless it is a really old machine. Even then, there are still parts out there on ebay and similar sites, but try to check first.

It’s a good idea to get a used machine tuned up at a repair shop, especially if you’re not familiar with sewing machine maintenance. On average, a tune up runs $75-$100. If it turns out further repair is needed, then that will add to the cost. Depending on the purchase price and the solidness of the machine, though, even with the tune up cost, you may spend about the same as a lower end new model, but the machine will last a lot longer.

A word about Singer sewing machines

I personally haven’t owned a Singer. All of mine are either Signatures (Montgomery Ward brand), a Kenmore (Sears brand) or my new Brother embroidery machine. They all are low shank machines, so the feet are interchangeable, and, except for the Brother, the bobbins are the same. Older Singers have either a Singer-exclusive slant shank or, if I’m not mistaken, a high shank, which has deterred me from owning one. The older Singers are good, solid machines, though, so if you aren’t worried about being able to use the same feet on another machine, they are a good choice.

Newer Singers are another matter. I’ve had friends purchase a brand new Singer that had it break just after the warranty ran out. The cost of repair made it better to replace the machine. Looking online, the general consensus is that Singers aren’t made to last anymore. For low-cost, entry-level machines, Brother tends to have a better reputation. Again, I haven’t owned a Singer, but, from what I’ve heard, I would stick with vintage models and avoid the new ones.

Questions?

These are just a few basic guidelines. If you have any other questions relating to sewing machines, ask in the comments and I will answer them as best as I can. If you have your own guidelines to add, feel free to comment those as well.

Like this post? To make sure you never miss a future post, please sign up for my newsletter.

This post contains affiliate links. If you click through any of the Amazon links and make a purchase, I will receive a small commission. There is no added cost to you.

Posted on February 26, 2020October 20, 2020 by sophiecls418 — 2 Comments

Easy Homemade Chicken Broth in an Electric Pressure Cooker

If you have an Instant Pot or other electric pressure cooker, delicious homemade chicken broth takes just a few minutes of prep. This technique can easily be applied to other types of broth as well.

The ingredients

When I make chicken broth, I prefer to use bones from a cooked chicken. It’s easy to cook a whole chicken in an electric pressure cooker, or use an oven-roasted or rotisserie chicken. Save the bones for broth to make a chicken stretch farther meal-wise. You can make the broth immediately after de-boning a cooked chicken. If you’re short on time, store the bones in the freezer until you’re ready.

To flavor the broth, I like to add some combination of carrots, celery, onion, garlic, salt and pepper. I usually use:

one onion peeled and cut into chunks
one or two carrots
two to three celery stalks broken into two or three pieces each
two to three cloves of peeled garlic
a few peppercorns
about 2 teaspoons of salt.

It’s easy to add salt and pepper to taste to the finished broth, so I lean toward adding less at the beginning.

Herbs like sage, bay leaf, parsley, basil and oregano are great additions, too. You could also add jalapeno to give it some spice.

Making the Chicken Broth

To make the chicken broth, put the bones, chosen vegetables and seasonings into the pot of your electric pressure cooker. Add enough water to cover the ingredients by 1-2 inches. Lock the lid and manually set the pressure cooker to cook on high pressure for 2 hours. When it’s done, depressurize naturally.

Once it’s cool enough to handle, I like to pour it through a mesh strainer to get all the small bones and vegetable remnants out. If not using the broth within a few days, it’s best to store it in the freezer.

That’s it. With a just few minutes of prep to assemble the ingredients, an electric pressure cooker makes flavorful chicken broth that tastes like it was simmered on the stove all day long. Unlike on the stovetop, though, there’s no worry about it boiling over, and the time is dramatically reduced.

Like this post? To make sure you never miss a future post, please sign up for my newsletter.

Posted on February 24, 2020October 20, 2020 by sophiecls418 — 2 Comments

Whole Chicken and Potatoes for Electric Pressure Cookers

whole chicken recipe for electric pressure cookers

Whole chickens are inexpensive, frugal type of meat. They provide easy leftover meals, and you can use the bones to make homemade broth for soups and to flavor other meals. While you can cook a whole chicken in an Instant Pot or other electric pressure cooker (this is the type I have) just by seasoning it and adding it to the pot with liquid, a few extra steps will add even more flavor to the final result.

Customize your whole chicken

I like to keep the seasonings fairly neutral so that I can get creative with the leftovers. My family often gets bored with multiple meals of chicken and vegetables. If I use some of the chicken for chicken tacos for the next meal and chicken soup with the rest, it makes it less monotonous.

In this recipe, to keep it neutral I use salt, pepper and poultry seasoning to flavor the chicken. It’s easy to adapt the seasonings for a different twist. Cumin, chili pepper and cayenne pepper work well for making chicken chili, tacos or tortilla soup with the leftovers. Garlic, ginger and orange zest work well for making leftover chicken stir-fry. Get creative with the flavors you like.

You can also leave out the potatoes or swap them out for other hardy vegetables. Root vegetables hold up the best with the longer cooking time the chicken requires. Sweet potatoes, carrots and parsnips are some possibilities.

Slow cook

One neat feature on most electric pressure cookers is the ability to use them as a slow cooker. If you’d rather slow cook your whole chicken, follow the steps through step 11. Instead of locking the lid and setting it to cook under high pressure, keep the lid in the venting position and select the slow cook setting. You will want to cook the chicken for about 3-4 hours on “high” slow cook or 6-7 hours on “normal” slow cook, which is the equivalent of “low” on a traditional slow cooker. I do recommend double-checking the instructions for the slow cook setting on your pressure cooker, as there may be some variations.

Print Recipe

Electric Pressure Cooker (Instant Pot) Whole Chicken and Potatoes

This is my method for cooking a flavorful whole chicken and potatoes in an electric pressure cooker. After a little prep work, you can walk away and let the pressure cooker do it's job without having to check on it or worry about overcooking. I'm using an 8 quart electric pressure cooker. If yours is smaller, you may need to adjust the size of the chicken and other ingredients accordingly.

Prep Time25

Cook Time35

Course: Main Course

Servings: 6 people

Equipment

Electric pressure cooker
Trivet or rack insert for the electric pressure cooker

Ingredients

5-6 lb whole chicken, giblets removed
1 large onion, cut into wedges
5-6 medium potatoes cut into large chunks Firmer potatoes, like Yukon golds work a little better, but I used Russets because that's what I had on hand.
4 tbsp coconut or other high heat oil
3/4 cup water or chicken broth
salt
pepper
poultry seasoning

Instructions

Season both sides of your chicken with your choice of seasonings. I used salt, pepper, and poultry seasoning, but you can adjust this to your family's taste.
Select the "Saute" setting on your pressure cooker.
Add the coconut oil to the pot and heat until melted and shimmery.
Brown the whole chicken on both sides in the coconut oil until lightly browned. I use this time do cut up the onion and potatoes.
Remove the chicken and set aside.
Add the onion wedges to the pot and cook until translucent and starting to brown.
Add about 1/2 cup of water or broth to the pot with the onions to deglaze the pot. Be sure to scrape up the browned bits from the bottom of the pot to mix into the liquid.
Turn off the "Saute" function.
Place the trivet on top of the onions and liquid in the pot. Add about 1/4 cup more of water or broth to the pot.
Place the browned chicken on the trivet.
Place the potato chunks around and on top of the chicken.
Lock the lid in place and cook on high pressure for 35 minutes.
Allow the pressure to release naturally and carefully open the lid.
Check the temperature of the chicken to ensure that it has reached at least 165 degrees Fahrenheit. If not done, cook for another 3-5 minutes under high pressure and recheck.
Carefully remove the potatoes, chicken and trivet.
Optional: Press "Saute" and allow the onions and liquid to simmer for a few minutes to condense the liquid to serve over the chicken and potatoes.
Optional: Place the chicken on a broiler-safe pan and place in the oven under the broiler for 3-5 minutes to crisp up the skin.
Plate and serve with a side of veggies.

Notes

I like to keep the seasonings fairly neutral so that I can get creative with the leftovers without worrying about seasonings clashing. In addition to potatoes, other root vegetables such as carrots can be used.

Whole Chicken and Potatoes for Electric Pressure Cookers

Like this post? To make sure you never miss a future post, please sign up for my newsletter.

This post contains affiliate links. If you click through any of the Amazon links and make a purchase, I will receive a small commission. There is no added cost to you.

Posted on February 21, 2020October 20, 2020 by sophiecls418 — 1 Comment

12 Must-Have Sewing Tools

This post contains affiliate links. If you click through any of the Amazon links and make a purchase, I will receive a small commission. There is no added cost to you.

If you’re just starting to sew, it can be daunting to figure out which sewing tools are nice to have, which are absolutely necessary and which are just a fancy waste of money. Everyone’s preferences are different, but there’s a few tools that I use almost every time I break out my sewing machine.

This list assumes you have the absolute basics of needles, thread and sewing machine. I plan to do an article next week on my sewing machine preferences, so if you’re still in the market for a sewing machine, stay tuned. Many of these items are handy for hand sewing, too, if that is your preference.

My Must-Have Sewing Tools

Cutting

Fabric Scissors. While you can get by with a good pair of craft scissors, fabric scissors cut much cleaner. I have two pairs. One is an all metal pair similar to these, although I’m not sure if mine are Gingher brand. My other pair are like these Singer brand scissors. Both of these have a bent handle that make it easier to cut fabric lying flat on a surface and have a minimum blade length of 8 inches. Remember, to keep them sharp, fabric scissors should only be used on fabric.
Embroidery Scissors. Clipping threads with bigger fabric scissors is tricky. It’s hard to trim threads as close as needed and it’s easier to accidentally snip the fabric. Embroidery scissors or similar scissors are a lifesaver when it comes to keeping threads neat and tidy. For these, the biggest things to look for is that they are small, sharp and have a sharp point. I currently have these Fiskars brand, which come with a handy place to store bobbins and pins. I would love to get a pair of stork embroidery scissors like these, but mainly because I think they are adorable.
Pinking Shears. Pinking shears cut in a zig-zag pattern that prevents fabric from fraying. It’s an easy way to finish raw seam allowances without a serger (overlock machine), zig-zag stitching or using a more time consuming method of finishing seams. My pinking shears are unmarked, so I’m not sure of the brand, but they are similar to these.
Rotary Cutter and Mat. These are more of a want than a need, but for cutting smooth, long, straight lines, a rotary cutter is extremely handy. To properly use a rotary cutter, you’ll also need a self healing cutting mat. These come in various sizes. Unless you’re only working on small projects, bigger is usually better. I use a Fiskars 45mm rotary cutter. This is an example of a cutting mat. Mine biggest one currently is 24 inches square, and I really wish it was bigger.
Seam Rippers. I find seam rippers much easier to use than scissors when ripping out stitches. They also work well for making button holes. I recommend having a couple on hand. I got a multi-pack like this because I’m always misplacing mine.

Measuring and marking

Measuring tape. A soft, flexible measuring tape like this one is a necessity for taking measurements for clothing. I recommend having more than one, because they seem to disappear, at least at my house.
Straight edge ruler or yardstick. These are especially useful for using as a guide for rotary cutters. Really, though, for measuring flat lengths, a rigid yardstick/meter stick is easier to use than a measuring tape. A smaller ruler is handy for measuring hems, seam allowances and quilt pieces. Neither has to be fancy. My yardstick came from a hardware store and my rulers are leftover school supplies. Grid-type rulers do come in handy sometimes, but I recommend starting simple to get an idea of the sizes you would use the most.
Tailor’s chalk. For marking, I’ve tried water and air soluble marking pens, but I always come back to simple tailor’s chalk. It’s inexpensive, it works well, and it lasts longer than markers.

Securing

Straight pins. I personally prefer long, thin quilting pins, but any straight pins will get the job done. You want to make sure the pins are sharp and smooth so they glide well through the fabric.
Clips. Sometimes you need to secure fabric that is either too thick or too delicate to pin. For those items, you’ll want some sort of clip. You could use something like these, use binder clips, or even clothespins, depending on the fabric.
Safety pins. Safety pins are great for securing a big quilt for basting, or securing a project that needs to be stored for a bit before you can finish it. They are also perfect to help threading drawstrings.
Pin storage. Pincushions are cute, available to purchase and easy to make. While I do have a couple I use regularly, I really prefer small containers that I can just drop the pins into. Altoid mint tins are my go-to, but any small container that is easy to reach in and grab a pin will work.

What are your must-haves?

Everyone has their own style, so something I use all the time might not get used at all by someone else. What sewing tools do you use all the time? Leave a comment letting me know what you like, what I missed or what I included that you never use.

Like this post? To make sure you never miss a future post, please sign up for my newsletter.

Posted on February 17, 2020October 20, 2020 by sophiecls418 — Leave a comment

T-Shirt to Yoga Shorts Refashion

If you’re new to refashioning or sewing clothing in general, loungewear is a great place to start. It’s less intimidating because, since you’ll only be wearing it at home, it doesn’t have to be perfect. This refashion project is perfect for a beginner because you only need two t-shirts to make it, and it’s mostly straight lines or slight curves.

I originally shared this tutorial a few years ago, before Thaddeus. The weather is beginning to warm up , so it’s a great time to sew some shorts.

I went on a little Pinterest binge a couple days ago looking for ideas to help clear my refashion stash. Saturday night I decided to make a pair of yoga pants out of a t-shirt using this tutorial. I wear a size eight on average, and used an XL adult t-shirt.

Adaptations from the original refashion project

I did make a few changes to the design. First, instead of cutting the shirt down the middle, I cut it down the sides from the middle of the underarm to the hem. This also means you’ll have an inseam and no side seams. That keeps any design on the front or back intact and moves them to the hips.

For the waistband, I cut the underarm seam from the sleeves and squared them up to be two equal rectangles, leaving the hem intact. I sewed the short sides together making a big, short tube from the sleeves. I then put the tube inside the waist of the pants with the pants right side out and the right side of the tube facing the inside of the pants. The raw edge of the tube lines up with the raw edge of the pants. I serged the top together like that. This made it so when the tube is folded down to the outside, the seam is covered.

I sewed it all on my serger. The entire refashion project took less than ten minutes. I probably should have added two minutes and switched from white to black thread. Or not.

If you don’t have a serger, you can use a zig-zag stitch to prevent breakage. Many sewing machines have specialty stitches for sewing knits, too, so check your machine to see if that is an option. This DIY T-Shirt Bag Tutorial has more information on stitch selection for knits.

Final verdict

They are a little loose at the waist. If I were planning to actually do yoga or wear them in public I should probably add some elastic at the seam. Since they will probably be used mainly for watching Doctor Who while sitting on the sofa, I probably won’t bother.

I personally don’t mind the length, but you could easily make them shorter by cutting them off to the length you prefer. Knit doesn’t unravel, so you can leave the edges raw, or turn them under and hem.

To make sure you never miss a post, please sign up for my newsletter.

If you click through any of the Amazon links and make a purchase, I will receive a small commission. There is no added cost to you.